

MATERIALS: The galvanized rockfall protection netting shall be of non-raveling construction and consist of a uniform double twisted hexagonal mesh of hot dipped galvanized steel wire having a diameter of 3.0mm (0.118 inches) after galvanization. The steel wire used shall be galvanized prior to weaving into mesh. All wire used shall equal or exceed Federal Specification QQ-W-461H, Finish 5, Class 3 in accordance with current ASTM A-641, Class 3, Soft Temper. The weight of zinc coating shall be as determined by ASTM test designation A-90. Mesh openings shall be hexagonal in shape and uniform in size measuring not more than 8 x 10 cm (3 ¼” inches x 4 ½” inches). The mesh wire shall be 3.0mm (0.118 inches). Selvedge wire shall be of heavier gauge than the mesh wire with a diameter of 3.8mm (0.150 inches). Lacing and connecting wire shall meet the same specification as the wire used for the netting except that its diameter shall be of 2.2 mm (0.087 inches) after galvanization. The use of alternate wire fasteners shall be permitted in lieu of tie wire provided the alternate fasteners meets ASTM A-764 and have a closed position tensile strength of 3033 Newton (700 lb.) while remaining in a positive locked closed condition. The inside opening area shall be 4.84 square cm (.75 square inches). Alternative fasteners are an approved alternate to lacing material All of the above wire diameters are subject to a tolerance limit of +/- 0.004 inches in accordance with ASTM A-641.
DIMENSIONS: Netting is supplied in rolls of the following dimensions: Width: .91m to 4.52m (3 ft. – 15 ft.) Length: 91.44m maximum (300 ft.)

Copyright © 2026 gabiondirect.com - All Rights Reserved.